1. Install Bars in
Bottom Pan
Place CPU on bottom pan
and determine locations for
bar installation. Choose the
closest clearance between
bars and CPU case. Use 4 of
the 8 black machine screws
provided.
The Brig uses 5 bars and
does not use a security tab.
3. Install Bars in Top Pan
With bars and security flanges installed, place CPU
on bottom pan. Front of CPU should be oriented with
curved flanges as shown. If CPU is taller than the bars,
screw in bar extensions. Use 4 remaining black ma-
chine screws to install top pan onto bars.
2. Install Security Tabs (Li’l Brig only)
Use self-tapping metals screws to install security tabs into holes
provided in the top and bottom pans at the back edge. This
operation requires slow, steady force. Once installed, screws are
difficult to remove. Several sets of holes are provided so you can
avoid cable routing conflicts. When the top is installed, the CPU
is trapped inside
©2010 CBT Supply, Inc. All rights reserved
