CBT Supply flipIT RIMLESS, Руководство по сборке

Страница: 8 / 12

8 FIK19R Rimless flipIT ® by SMaRTdesks® www.smartdesks.com ©2012 CbT Supply, Inc. 800-770-7042
assemble the rest
bracket and padded
rest together using
the hex nut, lock
washer and hex key
head bolt.
Leave the hex nut
finger tight so it can
be adjusted.
use two 1/2” wood
screws to install
bracket.
use the 5/32” hex key and 3/8” open end
wrench to tighten the rest. This is using the
table top as a reference and the pressure you
place on the rest to simulate the weight of
the monitor.
The weight of the monitor compresses the
rest, so it will be necessary to adjust the top
again after the monitor has been installed.
be familiar with this adjustment.
7. Install three legs
use a Phillips #2 drive or 3/8” hex drive to
install eight 1/2” bolts for each leg.