CBT Supply flipIT RIMLESS, Руководство по сборке

Страница: 5 / 12

FIK19R Rimless flipIT ® by SMaRTdesks® www.smartdesks.com ©2012 CbT Supply, Inc. 800-770-7042 5
Capture the pivot in the simple arm nylon
bushing. use the 7/16” open end wrench
and 5/32” hex key to tighten the pivot. This
operation is setting the depth of the flipIT lid
flush with the top surface. It is using the work
surface as a reference.
This adjustment may have to be refined after
the monitor is installed. note that this is the
pivot that will be loosened and re-tightened
to complete that adjustment using a straight
edge as a reference on the top surface.
3. Install post arm
orient the long bracket with the curve to
the keyboard and the L going away from the
cutout. Install fully tightened with four 1/2”
wood screws.
Insert the post for the
gas spring into the
middle position of
the front slot of the
long bracket.
Fully tighten using
7/16” open end wrench
and adjustable
crescent wrench.