CBS ArcSafe RSA-138A, Инструкция по установке и эксплуатации

Страница: 3 / 12

RSA-138A
Installation and Operation
1
1 Installation
D
ANGER
!
Before servicing any breaker, make sure that it matches the breaker discussed. If the breaker does
not match the breaker described above, please call CBS ArcSafe® for more information.
A
TTENTION
!
The location of certain items such as mimic bus, stickers, and/or placards may interfere with the
proper installation of the RSA. Please remove or reposition these items before installing the RSA.
1. Ensure that the switch is free from any obstruction that may interfere with the proper installation of the
RSA.
2. Align the RSA to the handle escutcheon on the opposite side of the switch’s operating handle, then
slide the handle adapter of the RSA over the switch handle, and gently lower the RSA into place. Ro-
tate the actuator arm gently to re-align as needed.