CBS ArcSafe RSA-138A, Инструкция по установке и эксплуатации

Страница: 2 / 12

Published and distributed by:
CBS ArcSafe®
2616 Sirius Road
Denton, Texas 76208
A division of:
GroupCBS, Inc.®
P.O. Box 1557
Gainesville, Texas 76241
Copyright CBS ArcSafe
®
2013
Printed in the United States of America
Reproduction, adaptation, or translation without prior written permission is prohibited except as is allowed by law.
More Products by CBS ArcSafe ®
RRS-1 –
Universal Remote Racking System (Rotary)
The CBS ArcSafe® RRS-1 is a universal remote racking system capable of remotely installing and removing rotary style draw out
circuit breakers without requiring any modification to the existing switchgear. Operation of the simple to use RRS-1 is quite
intuitive and requires only minimal setup. When used properly, the RRS-1 allows technicians to remain outside of the arc flash
boundary during the potentially dangerous racking operation.
RRS-2 –
Universal Remote Racking System (Non-Rotary)
The CBS ArcSafe® RRS-2 is a universal remote racking system capable of remotely installing and removing non-rotary style draw
out circuit breakers without requiring any modification to the existing switchgear. Operation of the simple to use RRS-2 is quite
intuitive and requires only minimal setup. When used properly, the RRS-2 allows technicians to remain outside of the arc flash
boundary during the potentially hazardous racking operation.
RRS-3 – Application Specific Remote Racking System (Rotary And Non-Rotary)
The CBS ArcSafe® RRS-3 product line is made up of various application specific remote breaker racking devices. Each standalone
system allows service personnel to remotely install and remove a particular type of circuit breaker safely while stationed safely
outside of the arc flash boundary during the potentially dangerous operation. The lightweight and compact design of the RRS-3
systems makes them ideal for hard to access areas where space is at a premium.
RRS-4 –
PLC Based Universal Remote Racking System (Rotary)
The CBS ArcSafe® RRS-4 universal remote racking system is an updated PLC based version of the best selling RRS-1. The dual
mode, source programmable, PLC based control system offers two different operating modes to choose from based on user
preference or the application. The RRS-4 is capable of remotely installing and removing rotary style draw out circuit breakers
without requiring any modification to the existing switchgear, allowing users to remain outside of the arc flash boundary during
the potentially hazardous racking operation.
RSA – Remote Switch Actuator
The CBS ArcSafe® Remote Switch Actuator (RSA) product line is made up of various application specific remote operating
devices. These products allow service personnel to remotely perform all aspects of an operation for a particular type of
electrical equipment from outside the arc flash boundary – reducing or eliminating the possibility of serious injury or death
resulting from an arc flash.
RSO –
Remote Switch Operator
During a remote operation, the CBS ArcSafe® RSO functions as both the power supply and user interface for the device being
remotely operated by the user. When paired with an applicable CBS ArcSafe® device, this portable standalone system allows
service personnel to remotely perform a racking or switching procedure from outside the arc flash boundary – reducing or
eliminating the possibility of injury or death resulting from an arc flash