CBC ZN-MDI2 M-IR Series Скачать руководство пользователя страница 6

c)   Accompany it with the information you received as to the offer to 

distribute corresponding source code. (This alternative is allowed 

only for noncommercial distribution and only if you received the 

program in object code or executable form with such an offer, in 

accord with Subsection b above.) 

The source code for a work means the preferred form of the work for 

making modifications to it. For an executable work, complete source code 

means all the source code for all modules it contains, plus any associated 

interface definition files, plus the scripts used to control compilation and 

installation of the executable. However, as a special exception, the source 

code distributed need not include anything that is normally distributed (in 

either source or binary form) with the major components (compiler, kernel, 

and so on) of the operating system on which the executable runs, unless 

that component itself accompanies the executable.
If distribution of executable or object code is made by offering access to 

copy from a designated place, then offering equivalent access to copy the 

source code from the same place counts as distribution of the source 

code, even though third parties are not compelled to copy the source 

along with the object code.

4. 

You may not copy, modify, sublicense, or distribute the Program except 

as expressly provided under this License. Any attempt otherwise to copy, 

modify, sublicense or distribute the Program is void, and will automatically 

terminate your rights under this License. However, parties who have 

received copies, or rights, from you under this License will not have their 

licenses terminated so long as such parties remain in full compliance.

5. 

You are not required to accept this License, since you have not signed 

it. However, nothing else grants you permission to modify or distribute the 

Program or its derivative works. These actions are prohibited by law if you 

do not accept this License. Therefore, by modifying or distributing the 

Program (or any work based on the Program), you indicate your 

acceptance of this License to do so, and all its terms and conditions for 

copying, distributing or modifying the Program or works based on it.

6. 

Each time you redistribute the Program (or any work based on the 

Program), the recipient automatically receives a license from the original 

licensor to copy, distribute or modify the Program subject to these terms 

and conditions. You may not impose any further restrictions on the 

recipients’ exercise of the rights granted herein. You are not responsible for 

enforcing compliance by third parties to this License.

7. 

If, as a consequence of a court judgment or allegation of patent 

infringement or for any other reason (not limited to patent issues), 

conditions are imposed on you (whether by court order, agreement or 

otherwise) that contradict the conditions of this License, they do not 

excuse you from the conditions of this License. If you cannot distribute so 

as to satisfy simultaneously your obligations under this License and any 

other pertinent obligations, then as a consequence you may not distribute 

the Program at all. For example, if a patent license would not permit 

royalty-free redistribution of the Program by all those who receive copies 

directly or indirectly through you, then the only way you could satisfy both 

it and this License would be to refrain entirely from distribution of the 

Program. 
If any portion of this section is held invalid or unenforceable under any 

particular circumstance, the balance of the section is intended to apply 

and the section as a whole is intended to apply in other circumstances. 
It is not the purpose of this section to induce you to infringe any patents or 

other property right claims or to contest validity of any such claims; this 

section has the sole purpose of protecting the integrity of the free software 

distribution system, which is implemented by public license practices. 

Many people have made generous contributions to the wide range of 

software distributed through that system in reliance on consistent 

application of that system; it is up to the author/donor to decide if he or 

she is willing to distribute software through any other system and a 

licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a 

consequence of the rest of this License.

8. 

If the distribution and/or use of the Program is restricted in certain 

countries either by patents or by copyrighted interfaces, the original 

copyright holder who places the Program under this License may add an 

explicit geographical distribution limitation excluding those countries, so 

that distribution is permitted only in or among countries not thus excluded. 

In such case, this License incorporates the limitation as if written in the 

body of this License.

9. 

The Free Software Foundation may publish revised and/or new versions 

of the General Public License from time to time. Such new versions will be 

similar in spirit to the present version, but may differ in detail to address 

new problems or concerns.
Each version is given a distinguishing version number. If the Program 

specifies a version number of this License which applies to it and “any later 

version”, you have the option of following the terms and conditions either 

of that version or of any later version published by the Free Software 

Foundation. If the Program does not specify a version number of this 

License, you may choose any version ever published by the Free Software 

Foundation.

10. 

If you wish to incorporate parts of the Program into other free 

programs whose distribution conditions are different, write to the author to 

ask for permission. For software which is copyrighted by the Free Software 

Foundation, write to the Free Software Foundation; we sometimes make 

exceptions for this. Our decision will be guided by the two goals of 

preserving the free status of all derivatives of our free software and of 

promoting the sharing and reuse of software generally.

NO WARRANTY

11.

 BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE 

IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED 

BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN 

WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES 

PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, 

EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, 

THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 

A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND 

PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE 

PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL 

NECESSARY SERVICING, REPAIR OR CORRECTION.

12. 

IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR 

AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY 

OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE 

PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR 

DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR 

CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY 

TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF 

DATA OR DATA BEING RENDERED INACCURATE OR LOSSES 

SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE 

PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF 

SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE 

POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS

How to Apply These Terms to Your New Programs

If you develop a new program, and you want it to be of the greatest 

possible use to the public, the best way to achieve this is to make it free 

software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest to attach 

them to the start of each source file to most effectively convey the 

exclusion of warranty; and each file should have at least the “copyright” 

line and a pointer to where the full notice is found.
one line to give the program’s name and an idea of what it does.
Copyright (C) yyyy name of author

This program is free software; you can redistribute it and/or modify it under 

the terms of the GNU General Public License as published by the Free 

Software Foundation; either version 2 of the License, or (at your option) 

any later version.

This program is distributed in the hope that it will be useful, but WITHOUT 

ANY WARRANTY; without even the implied warranty of 

MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See 

the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along 

with this program; if not, write to the Free Software Foundation, Inc., 51 

Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.

Содержание ZN-MDI2 M-IR Series































































































































































Отзывы: