Installation
Guide
50
6. System
Integration
GANZ PTZ cameras are allowed to be integrated into other suppliers'
surveillance systems with large set of built-in protocols. Refer to the following
sections for more information.
6.1
Using Pelco Keyboard
The PTZ Camera can be controlled through the
Pelco keyboard. Please follow the
instructions below to manipulate the camera.
Open the OSD
<9 5> + hold <Preset>
<7 7> + <Preset>
Press the keys, <9 5> + hold <Preset> or <7 7> +
<Preset >, to display the OSD menu.
ENTER
Iris Open
<9 5> + hold <Preset>
To send a “ENTER” command, press < Iris Open> or
<9 5> + hold <Preset>.
Set and execute PRESET
Hold <Preset>
To set “Preset”, hold the key <Preset>.
<Preset>
To execute a preset position, press the key <Preset>.
Set and execute SEQUENCE
By OSD
To set “Sequence”, please enter the OSD and go to the
Preset setting menu.
<7 0 ~ 7 8> + <Preset>
The following Presets allows you to execute Sequence
quickly.
***<7 0> + <Preset>: Sequence 1
<7 1> + <Preset>: Sequence 2
.
.
.
<7 6> + <Preset>: Sequence 7
<7 8> + <Preset>: Sequence 8
*** <7 7> + <Preset>: Reserved; also used to open OSD
Set and execute CRUISE
Hold <Pattern>
To set “Cruise”, hold the key <Pattern>.
<Pattern>
To execute “Cruise”, press the key <Pattern>.
