Installation Guide
15
Centesimal Digit Decimal Digit Single Digit it
NOTE:
The number “0” should locate upwards as shown in the
diagram above for correct switch definition.
3.3.4
Dome Control Protocol Setting
Define the protocol you are going to use basing on the devices of your
surveillance system. Generally, use one protocol even the devices are
provided from different manufacturers. Use the switch to set your dome
control protocol and the baud rate. Refer to the table below and turn the
arrow to choose a protocol for your speed dome.
Switch No.
Protocol
Baud Rate
00
VCL 9600
01
Pelco D
2400
02
Pelco P
4800
04
Chiper 9600
05
Philips 9600
07
GANZ-PT 9600
08
AD422 4800
09
DM P
9600
11
Pelco D
4800
12
Pelco D
9600
13
Pelco P
2400
14
Pelco P
9600
15
JVC 9600
Select protocol: Pelco D, with switch no. 01 and baud rate 2400, for instance,
the protocol switch should be set as below.
