CBC Ganz ZT-WD Series, Инструкция по эксплуатации

Страница: 9 / 27

09
Installation
A-1. When installing on a rigid wall, make three 8mm diameter holes by drilling tool. (depth 37mm)
A-2. Put tapping screw-buffer (Calblock) inside the holes.
A-3. Put Wall bracket on the assigned location.
A-4. Fix the bracket with screw driver.
A. Installation
B. Grounding
The camera have grounding and surge protection to prevent the damage from high current transients that can
occur in installations that are subject to electrical storms and/or nearby lightning weathers.
To ensure CE and
FCC compliance as well as to protect against these high current accidents
, installers need to provide an Earth
connection to a specific connection on the camera. Note: a ground connection to the exterior of the camera (for
example, to the mounting foot) is not enough.
Wall or Ceiling
▲
46
84
The camera must be installed according to industry certified practices and local electrical
codes.
Warning!!