- 31 -
Application settings
Weekly schedule
Sun ~ Sat
. Selects the days of the week to perform the following operations.
Snapshots begin at
. Sets the time to start operations.
Snapshots stop at
. Sets the time to stop operations.
Setting identical begin time and stop time indicates 24-hour operation.
All the time except for the above schedule
. Sets the schedule all the time except for the above in a week.
Event operation
Delay second(s) before detecting next event
. Sets the time delay before restarting to check on the
triggering condition when the current condition is triggered.
Take snapshots at second(s) after event
. After the camera has taken a snapshot when a condition is
triggered, another snapshot will be taken after this configured interval, in seconds.
Trigger condition
. There are four conditions relative to the digital input and the three windows for
motion detection. More than one condition can be selected at once. Select the appropriate digital input
condition that suits the characteristics of the external device:
• high, low.
Selects level-triggering via external voltage input
• rising, falling
. Controls edge-triggering. There are three windows for motion detection. Each can be
assigned a name. If motion detection has not been set up, “undefined” will display instead of the
window title. If this happens, click on “Motion detection” and a prompt will direct the User to the
configuration page for motion detection.
• Trigger action
. There are four options for two types of action. Multiple conditions can be selected
simultaneously. While choosing to trigger an output alarm, the digital output will short both pins and
complete the external device’s circuit. The normal state is open. Either e-mail or FTP can be used to
transmit uploaded snapshots. The snapshot names will be “vpre.jpg,” “vtrg.jpg,” and “vpos.jpg,”
respectively. The names signify the snapshots before an event, during an event, and after an event. The
date and time suffix may also be added as an option. Confirm the external mail or FTP server settings
in the network configuration.
• Reset output
. Select and save this option to reset the external device to its original state.
Sequential operation
Snapshot every second(s)
. The DDK-3000 Video Encoder will send snapshots at the specified intervals
to the destination address using the method selected below. This operation is still subject to the conditions
set in the weekly schedule.
Send snapshots by e-mail
. Selects the uploading method following the intervals set above. The snapshot
named “video.jpg” will be attached to the e-mail with the subject title “Periodic snapshots.”
Send snapshots by FTP
. The snapshots will be uploaded to the external FTP server with the file name
defined in the next option. This can also be used to refresh the captured images stored in the external web
server to build creative homepages.
Содержание DDK3000
Страница 1: ......
