veer
WARDROBE
Made in Vietnam - r04
Page 2 of 6
1
2
A. Insert 4
cams
into 2
bottom fixed shelves
as
shown. Make sure arrows on each
cam
points
towards nearest edge with holes.
B. Insert 8
wood dowels
and 2
cam screws
into
partition
as shown. Secure, but do not over
tighten, cam screws with a
phillips head
screwdriver
.
3
A. Fit dowels of
right side panel
into corresponding holes of 1
top
and bottom fixed shelves
as
shown. Using a screwdriver,
attach top shelf to
right side
panel
with 2
small bolts
, 2
small
spring washers
and 2
small flat
washers
.
B. Attach bottom shelf to
left
side panel
, by turning each
cam
clockwise until it securely
engages the cam screw.
Repeat steps 3A and 3B for
partition
.
NOTE: Do not
over tighten
the cam screws
Insert 8
wood dowels
and 2
cam screws
into
right and
left side panels
as shown.
partition
right side panel
right side
panel
partition
top fixed
shelf
bottom fixed
shelf
bottom fixed
shelf
small flat washer
small spring washer
NOTE: Do not
over tighten
the bolts
NOTE: Position
bracket for rod down
when inserting hardware
NOTE: Make sure the
bracket for the rod faces
away from right side panel
during assembly
left side panel
Customer Service
800.606.6252
| Latest instructions available at
www.cb2.com
NOTE: Make sure arrows on
each cam points towards
nearest edge with holes
A
B
A
A
B
