CB ELECTRONICS A-Mon, Руководство пользователя

Страница: 9 / 22

A-Mon – Analogue Monitor Control Unit
19 March 2018  CB Electronics 6 Version 3.0
O
O
p
p
e
e
r
r
a
a
t
t
i
i
o
o
n
n
The A-Mon powers up with hardware mutes activated, depressing the Mute key on the
TMC-1 or the Mute key on the A-Mon will disable the Hardware mutes, to enable the
Hardware mutes use Ctrl-Mute on the TMC-1 or the Mute key on the A-Mon.
The three LED’s on the front of the A-Mon indicate the following
•
Power: On when connected to power
•
Mute: On when Hardware Mute is activated and ALL inputs and outputs are
muted.
•
Comms: Indicates communications received from TMC-1. When key is
depressed or the knob is turned the LED will flash as the commands are
received, otherwise the LED will flash about once a second.
•
Mute Switch: Enable/Disable Hardware Mute, the Mute and Un-mute command
from the TMC-1 remote will also disable the Hardware Mute.
Read the TMC-1 manual for information on controlling the A-Mon.
S
S
t
t
e
e
r
r
e
e
o
o
D
D
o
o
w
w
n
n
m
m
i
i
x
x
The A-Mon Stereo Down Mix feature is used to monitor 7.1 and 5.1 on a Stereo system or to
check how a 5.1 or 7.1 mix will sound in stereo. The A-Mon design allows for variable ratios
but they are currently fixed as follows:
Left Centre Left Surround Left Rear
Ratio 0.69 0.47 0.47 0.39
Left Out
dB -3.2 -6.56 -6.56 -8.14
Right Centre Right Surround Right Rear
Ratio 0.69 0.47 0.47 0.39
Right Out
dB -3.2 -6.56 -6.56 -8.14