CB ELECTRONICS A-Mon, Руководство пользователя

Страница: 16 / 22

A-Mon – Analogue Monitor Control Unit
19 March 2018  CB Electronics 13 Version 3.0
5.1/7.1/9.1.2
Atmos: XPand provides the control
for the two ceiling speakers and
two front speakers
Surround Bass Extension: Left and
Right sum and low pass of all the
surround channels.
7.1: XPand switches the Front
surrounds to Ls and Rs.
7.1 to 5.1 Routing: Switch the rear
speakers to Ls and Rs for 5.1 (TMC-1
provides the 5.1 gain Trim).
Right Surround
Right Front Surround
Left Back
Left top
Right Back
Right top
Left Front Surround
Right Front Surround
Gnd
XMon
Left Top
LSur
Right Top
RSur
XPand
LBack
RBack
Left Rear Base
Right Rear Base
5.1
7.1
9.1.2
Left Surround
Left Front Surround
Note: Other combinations may be added at a later date, for example a 9.1.4 system if the
rear speaker switching is not required.
7.1 to 5.1 Switching
The XPand provides surround switching between Atmos, 7.1 and 5.1. When switching from
7.1.4 to 5.1 the rear surrounds speakers are connected to the side surrounds. When
switching from 9.1.2 to 7.1 the front side speakers are connected to the side surrounds.
When switching from 9.1.2 to 5.1 the rear surrounds are connected to the side surrounds.
Surround Bass Extension
Two internal links are used to select outputs 5 and 6 between inputs 5&6 or the sum of the
left and right surround channels followed by a low pass filter to provide left and right
surround bass extension outputs.
Connecting the TMC-1 to A-Mon and XPand
Short VGA Cable
Long DCC VGA Cable
TMC-1 XPand
A-Mon