Cayman Systems 2E-H-W, Руководство пользователя

Страница: 101 / 170

Cayman 2E-H-W User’s Guide Using the Command Line Interface
November 2000
4-43
set trafficshape ethernet [ A | B ] rate [ 56000 -
10000000 ]
Specifies the maximum number of bits that can be transmitted.
Options are 56000, 384000, and 1000000.
Wireless Settings
(HomeRF)
set wireless id identifier
Specifies the name of the Cayman 2E-H-W on your wireless network.
The default HomeRF wireless ID for a Cayman 2E-H-W consists of
two four-digit numbers, which are located on the label on the
bottom of your Cayman 2E-H-W. You must configure other devices
on your wireless network to use this identifier before they can
communicate with your Cayman 2E-H-W.
Wireless Settings
(802.11)
set wireless essid identifier
Specifies the name of the Cayman 2E-H-W on your 802.11 wireless
network. The default value is
Cayman-2Eserial_number
. All
wireless clients must use the identifier.
set wireless default-channel [ 1 - 14 ]
Specifies the radio channel that your Cayman 2E-H-W uses for
wireless network communications. Enter a number in the range 1-11
for U.S. installations. Refer to page 3-33 for information on channels
authorized for other countries.
set wireless basic-rates [ auto-1-2 | auto-all ]
Specifies the transmission rate that your Cayman 2E-H-W uses for
wireless network communications. Do not change the default value
(
auto-all
) unless you are instructed to do so by Cayman Technical
Services.
set wireless enable-wep [ off | on ]
Specifies whether you want to use WEP (Wired Equivalent Privacy)
to encrypt your network traffic to protect it from snooping. If you
enable WEP, you must specify one or more encryption keys, and all