CaWi TF1000, Руководство пользователя

Страница: 18 / 29

Page | 18
MANUAL (UK)
Sign in
With this function you can sign in the animals by
location / box. This is only possible when the farm is
configured and the locations are entered in the
system.
At location, select the location. Press the number
for that. A keyboard appears with which you can
enter the wanted location number. Then press
[ENT] to confirm the number.
At box, select the box number. Press the number for that. A keyboard appears with which you can
enter the wanted box number. Then press [ENT] to confirm the number.
At animal, select the animal number. Press the number for that. A keyboard appears with which you
can enter the wanted animal number. Then press [ENT] to confirm the number.
If your configuration is correct, press (OK) in the lower right corner. You can then be notified that the
configuration is not possible. This may be because an animal has already been signed in at the
location, or the animal has already been signed in at another location. In this case you must first sign
out an animal.
Other error messages can occur because the box or location is not in the configuration.
When the placement is successful, a check mark appears and you can press the button.
The screen then immediately goes to the curve setting for this animal .
If you then leave the feed curve unchanged, it will only start calculating the feed at 00:01 am. If
you change the feed curve for that animal, the feed will be calculated over the coming feed times
that same day.