CaWi TF1000, Руководство пользователя

Страница: 9 / 29

Page | 9
MANUAL (UK)
Animal ->
With this function you can view and change the curve of the selected animal. You can also change
the pre-days and feed percentages from the animal.
The wanted curve of the animal can be selected by using the arrow keys above and below
the screen. You also have the option of entering the curve number. Press the number for
that. A keyboard appears with which you can enter the wanted curve number. Then press
[ENT] to confirm the number.
This function is only required for nursery.
With this function you enter the number of days that the animal is before the expected
delivery date. The number of pre-days to be set is a maximum of 14 days. Then he counts
back one day every day (at 00:01 am) until day 0, after day 0 the feed curve will start.
If the Pre-day is at 0, the feed curve starts automatically! If the pre-day number
is 1 or higher, feeding is done according to the pre-days, regardless of the number of
the curve days. During the pre-days, a fixed amount of feed is given equal to day 0 of
the feed curve!
In the two windows next to the curve number you can enter the correction on the curve
and the curve day of the animal.
In the upper window you can enter a correction (75-125) percentage on the curve by
animal. This value can deviate a maximum of 25 percent on the curve assigned to the
animal. Press the number for that. A keyboard appears with which you can enter the wanted
deviation in percentages. Then press [ENT] to confirm the number.
Note: This value remains until this value is changed manually again.
In the lower window you can adjust the curve day of the animal. Press the number for that. A
keyboard appears with which you can enter the wanted curve day. Then press [ENT] to confirm the
number.