CaviBlaster 1325-GSS
OPERATING INSTRUCTIONS
WARNING
To ensure operator safety and efficient operation of the CaviBlaster
it is essential to follow these instructions.
Preparing the CaviBlaster
system for operation:
1. Inspect the CaviBlaster
power unit, hoses and gun for any signs of damage.
2. Inspect inlet strainer (Figure # 1) to ensure that it is not clogged. Clean if necessary.
3. Check oil and fuel levels:
Oil Level in pressure pump (Figure # 2)
Oil Level in engine (Figure # 3).
Oil Level in Gear Box (Figure # 14)
Gasoline Level in detachable fuel tank (Figure # 4).
Fill lubricating oil(s) to proper level(s) in the pressure pump (Red cap on pump) (Figure #
6) and engine (Cap on head cover) (Figure # 5) per manufacturers’ operating manuals.
Pressure Pump Oil (SAE 30W-Non Detergent), Honda Engine Oil (SAE 10W 30).
4. When feeding water to the CaviBlaster
power unit with the feed pump, connect the 1″
diameter clear PVC feed hose to the cam-lock plug on the inline strainer inlet (Figure #
7, Figure # 8)
5. Connect the 1″ red rubber by-pass hose to the cam-lock plug on the pressure-regulating
unloader (Figure # 9). The by-pass hose has a cam-lock socket on one end. Direct the bypass
hose away from the working area and secure the hose.
6. Connect the Single ¼″ black rubber fuel line from the external fuel tank to the fuel line
attached to the fuel filter and engine. This connection is made with a quick connect fitting
(Figure # 10).
7. Connect the High Pressure Hose (Figure # 11)
Page -
2
CaviBlaster 1325-GSS Operations Manual
For More information please email [email protected] or call 1-(352)275-5319
