Remtron Pump Boss II
User Manual
12
9M02-8814-A001-EN
Version 2.3
Figure 3: RCA7 Antenna Mounting Template
3. Feed the antenna cable through the center (5/8-inch diameter) hole. Insert the rubber grommet in the hole
to protect the cable from chafing. Two grommets are supplied on each cable to accommodate either a
5/8-inch diameter or a 3/4-inch diameter hole. Cut off the unused grommet.
4. Secure the antenna using the #6 hardware supplied. Insert the screws through the antenna and secure
with the lock washers and nuts.
5. Route the cable to the receiver and secure with cable ties.
4.5
Optional Antenna Mount
Tools Needed:
•
Drill or punch for 3/4-inch diameter hole
This antenna mount accepts the whip type of antenna.
