Cattron Excalibur OCU, Руководство пользователя

Страница: 18 / 46

Excalibur
User Manual
18
9M02-7573-A001-EN
Version 3.0
1. Fully depress the ON/HORN pushbutton to the second stage and observe that the horn on the targeted
crane or machine responds.
2. Now that the system is active, you can operate the OCU control pushbuttons as required. Any or all
functions may be operated simultaneously if the controlled machine permits such operation.
3. The OCU may be switched off by pressing the STOP
pushbutton until the ‘STATUS’ LED extinguishes.
In normal operation, the ‘STATUS’ LED flashes green at 1.25 second intervals.
When the battery voltage becomes low, the ‘STATUS’ LED flashes red at one second intervals to alert the
operator that the battery pack needs to be replaced or re-charged.
The ‘STATUS’ LED will also illuminate in a series of red blinking sequences to indicate a specific OCU fault. Refer
to Appendix II: System Fault/Status Messages for a table of these OCU Fault/Status Messages.