CANplus
TM
CP1000
Installation Manual
5
9M01-1000-A401-EN
Revision B
2
Mechanical Mounting
The CP1000 control panel is adaptable to a wide variety of applications. The included engine harness connector
facilitates quick installation.
The following is a list of installation guidelines:
1. The panel mount shall be
a.
Easily accessible by the operator.
b.
Placed away from moving equipment.
c.
Stable during equipment operation and transportation.
2. The vibration isolation mounts shall
a. Be properly installed.
b. Have normal movement.
c. Be located so the panel does not hit any adjacent structure during operation.
2.1 AluFlex™ Panels
AluFlex panel enclosures are constructed from extruded aluminum and powder-coated for durability. The
faceplate is aluminum or powder-coated galvanized steel and the backplate is powder-coated galvanized steel.
The enclosure is splash proof and includes condensation drain holes in the bottom.
AluFlex panel isolation mounts are preinstalled to a heavy-duty mounting bracket with mounting holes to
accommodate various installations. Isolator mounts should not be twisted when installed, as doing so will lead to
premature failure.
2.1.1 Mounting Templates
The following two figures show the one-to-one hole template for the CP1000 mounting bracket.
