Quick Start Guide
Aquavx™
1. Wire Your Aquavx
1. Drill holes in the unit enclosure for the power feed as well as for the amount of I/O wiring required. Affix
the necessary conduit fittings and assure proper waterproofing.
2. Wire 100-240VAC power to the Line (Black), Ground (Green), and Neutral (White) terminals on the
#1700-0101
power supply at the top of the panel.
3. Attach the black wire from the power supply BAT- terminal to the negative battery post.
4. Wire I/O connections using the screw terminals on the quick disconnect plugs in their respective
channels. There is a quick reference diagram below the connectors on the swing panel. For more
detailed information, reference the schematic drawings and online manual found at
/When ready, power on the unit with the power switch to the right of the I/O connectors.
Configuration Sheets and Manuals Are Available at Cattron.com
Nimble: 9M01-9207-A001 | EN-2022-10-V1
1.
2.
3.
4.
Power
Switch
