Cattini Oleopneumatica YAK 330/S, Руководство по эксплуатации и техническому обслуживанию

Страница: 16 / 56

to clean thoroughly, before refitting everything, beating the balls again if necessary POS. 5,7 - A06065 POS. 5,7 - A06065 ; bleed off all
air, then put the jack back in normal position and re-open the cock POS. 10 - A06067 POS. 10 - A06067 .
HYDRAULIC FLUID LEAKS HYDRAULIC FLUID LEAKS
- Silencer is leaking fluid POS. 2 A06065 POS. 2 A06065 : The pumping element POS. 25 - A06065 POS. 25 - A06065 or gaskets POS. 16,17 - POS. 16,17 -
A06065 A06065 could be worn and must be replaced.
- Vacuum pump is leaking fluid
POS. 31 - A06065 POS. 31 - A06065
: Check the fluid level; it might be too high. If the jack has been
turned over or tipped up, the leak will stop after a short time.
THE PIST THE PISTONS F ONS FAIL T AIL TO GO BACK IN COMPLETEL O GO BACK IN COMPLETELY EVEN WITH THE LEVER IN THE Y EVEN WITH THE LEVER IN THE
LOWERED POSITION LOWERED POSITION
- Check the vacuum pump POS. 31 - A06065 POS. 31 - A06065 : remove, clean and refit it. Remove and clean the head POS. 22 - POS. 22 -
A06065 A06065
THE PIST THE PISTONS RAISE VER ONS RAISE VERY SLOWL Y SLOWLY Y
- Check that the cock POS. 10 - A06067 POS. 10 - A06067 located between the tank and the motor pump is open.
EN EN
16