Caton Vpro 5100, Руководство пользователя

Страница: 8 / 26

VprO 5100/5100D User's Guide
- 8 -
2.
2. 2.
2. Front
Front Front
Front panel
panel panel
panel Control
Control Control
Control
2-1Basic
2-1Basic 2-1Basic
2-1Basic Operations
Operations Operations
Operations
2-1-1 Turn on the VprO
To turn on the VprO, follow these steps:
①
Press the power switch on the rear panel.
②
When the VprO is turned on, the message shown below appears on the
screen
Figure 2-1 Messages appearing after the VprO is turned on
The initializing sequence of VprO is within 30s. Turning it off and back on
in a short interval of time could cause it to malfunction.
2-1-2 Operating status display
After the initializing sequence is completed, the operating status window
displays on the screen as shown in Figure 2-2.
Figure 2-2 Operating Status Window
2-1-3 LEDs status introduction
①
If no source detected by VprO. the LEDs appear as shown in Figure 2-3
Figure 2-3 No source detected by VprO
initializing
Receiver TSOut Decoder
System CAS Testsig