Catler PW 3010, Инструкция по эксплуатации

Страница: 11 / 88

9
OPERATING YOUR PLATE WARMER PW 3010
OPERATING YOUR PLATE WARMER PW 3010
Before fi rst use
Before fi rst use, remove all packaging and
advertising labels / stickers from the warmer.
Using
1. Place the plate warmer on a clean and
dry surface. Make sure the label side is
facing down.
2. Insert clean and dry dishes into individual
folds. You can put up to 2 plates in one
fold. You can warm up to 8 plates at once.
3. Insert the power plug into a power
socket. Plate heating starts automatically.
4. Once the plates are suffi ciently warm,
disconnect the power cord plug from
the mains socket and let the heater cool
down. Always use protective gloves or
a towel to remove dishes from the fold.
The plates are very hot. If you need to
warm up other plates, put them in the
folds and plug the plug back into the
mains socket.
Attention:
Before placing the plates, make sure that the
plates are completely dry.
Always use protective gloves or a towel to
remove dishes from the fold. The plates are
very hot. Risk of burns.
Recommended warming times
1–4 plates 30–45 minutes
5–8 plates 60 minutes
The heating times depend on the material and
the thickness of the plates.
NOTE
Tips for proper warming
Always warm plates that are the same size,
are of the same material and of the same
thickness.
Always use clean dishes to avoid
contaminating the blanket by food residue.
Never place damp or wet dishes.