Catler JS 8011, Инструкция по эксплуатации

Страница: 20 / 25

18
CARE AND CLEANING
CARE AND CLEANING
Before cleaning the appliance, always make
sure that the juicer has been stopped. Then
unplug the power cord from the mains
socket and let it cool down properly.
It’s important that the juicer be cleaned
immediately after each use to prevent the
food residues from drying in the juicer
interior. Regular maintenance will prolong
the lifetime of your juicer.
To clean the juicer and its accessories, never
use abrasive cleaning agents, thinners, petrol
or similar substances.
WARNING!
DO NOT WASH THE
APPLIANCE, MAINS
CORD AND PLUG
UNDER RUNNING
WATER AND DO
NOT IMMERSE IT
IN WATER OR ANY
OTHER LIQUID.
DISASSEMBLING YOUR JUICER
Before disassembling, make sure that the
juicer is fully stopped and the power cord is
unplugged from the mains.
1. Store the pulp container and the juice jug
aside.
2. Turn the feed tube anticlockwise until
the arrow on the chamber is aligned with
the open lock mark. Carefully lift the feed
tube. Take care as it may contain raw
material residues.
3. Move the chamber with the screw and
the strainer installed in a sink or other
place suitable for cleaning.
4. Turn and pull the press screw upward to
remove it.
5. Then remove the strainer.
6. Clean strainer, press screw and juicing
chamber according to the instructions
below.
NOTE
If you processed raw materials rich
in pulp, the press screw may be
diffi
cult to remove. This is normal. Use
reasonable force to remove it.
CLEANING STRAINERS, PRESS SCREW
AND FEED TUBE
Immediately after disassembling, wash used
strainer, press screw, feed tube and pusher
under running warm water.
Wash in warm water with a small amount of
washing-up liquid as needed. Rinse and wipe
dry.
If the strainer is contaminated with raw
material residues, remove them with the
supplied brush. We recommend to clean the
strainer with the brush under running water.
If the strainer is heavily contaminated
or contains dried raw material residues,
we recommend to immerse it in warm
water with 10% of lemon juice for about
10 minutes. If the strainer holes were
clogged, the juicing yield would be reduced.
NOTE
Strainers, press screw, feed tube,
pusher, juice jug and pulp container
are suitable for dishwashers (in upper
basket).