14
OPERATING YOUR ESPRESSO ES 8014
OPERATING YOUR ESPRESSO ES 8014
BEFORE FIRST USE
Remove all packaging from the appliance
and dispose of it in a proper manner. Before
a proper disposal, make sure you have
removed all accessories from the packaging.
Wash the accessories in warm water with
a small amount of washing-up liquid, then
rinse thoroughly.
Wipe the appliance with a soft sponge lightly
moistened in warm water and wipe dry.
Put the appliance on a flat, dry and clean
surface. Make sure that the drip tray and the
grille are installed properly in the appliance.
If needed, screw the front adjustable feet in
or out to ensure that the appliance is level.
Filling the container
You can fill the water tank in two ways: either
open the tank lid or remove the lid.
The tank lid is located at the appliance top
behind the cup heating surface. Lift the lid
and pour cold and clean water in the tanks
through the rear hole. The close the lid.
In order to remove the water tank,
it’s necessary to open the back cover first,
then you will be able to remove the tank
from the appliance. Fill the tank with cold
and clean water. Then insert the container
back in the appliance and close the back
cover.
When filling the tank with water, observe
minimum and maximum level marks. Never
fill the tank over the maximum level line.
ATTENTION:
Only add clean and cold water in the
tank. Do not use any other liquids.
We do not recommend using highly
filtered, demineralised or distilled
water as this could adversely affect
the flavour of the coffee and the
appliance's coffee brewing process.
NOTE
Do not leave water in the tank longer
than 1 day. To brew high-quality
coff ee, fresh water should always
be used. Otherwise, the resulting
coff ee drink taste could be adversely
aff ected. If the appliance is to be left
unused, remove and empty the water
tank.
Turning on and off
WARNING!
Before turning
the appliance on,
make sure that the
steam dispenser
control and the hot
water spout control
are set in the OFF
position.