Catler ES 8013 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 48

Catler ES 8013 Скачать руководство пользователя страница 19

19

OPERATING YOUR CATLER PRODUCT

PROGRAMMING DOUBLE ESPRESSO

1.

To begin programming, press the
PROGRAM button once. The machine will
beep once and the program button will
begin to fl ash. This indicates the machine
is in programming mode.

2. Press 2 CUP button to start espresso

extraction. Press 2 CUP again once
desired volume of espresso has been
extracted. The machine will beep twice to
indicate the new 2 CUP volume has been
set.

RESETTING DEFAULT VOLUMES

To reset the machine to the default 1 CUP
and 2 CUP shot volumes and espresso water
temperature press and hold the PROGRAM
button until the machine beeps three times.
Release the PROGRAM button. The machine
will return to its original default setting.

NOTE
Default settings: 1 CUP shot volume
is approx. 30ml. 2 CUP is approx. 60ml.

MANUAL ESPRESSO VOLUME

Press and hold the 1 CUP or 2 CUP button.
Release the button once suffi

cient

pre-infusion time has elapsed & full pump
pressure will be applied. Press either the
1 CUP or 2 CUP button when suffi

cient

espresso volume has been extracted.

NOTE
For optimal fl avour when using
a 1 CUP fi lter basket, you should
extract approx. 30ml. When using
a 2 cup fi lter basket, you should
extract approx. 60ml.

WARNING:
The metal parts of the portafi lter will
be very hot.

«
...
17
18
19
20
21
...
»

Содержание ES 8013

















































Отзывы:

Нет отзывов