Catler ES 8013, Инструкция по эксплуатации, Страница: 16 / 48

16
OPERATING YOUR CATLER PRODUCT
FILLING THE WATER TANK
• Ensure the water fi lter is securely fi tted
inside the tank.
• Fill the water tank with cold tap water to
the maximum mark on the side of the
tank and slide the water tank back into
position at the back of the machine.
• Plug the power cord into power outlet
and switch On at power point.
• Press the POWER button. The POWER
button surround will fl ash while the
machine is heating. When the correct
temperature has been reached, all the
button surrounds on the control panel
will illuminate.
NOTE
Check the water level before use and
replace the water daily. The water tank
should be fi lled with fresh, cold tap
water before each use.
Do not use de-mineralised or distilled
water or any other liquid.
SETTING THE GRIND SIZE
The grind size will aff ect the rate of water
fl ow through the coff ee in the fi lter basket
and the fl avour of the espresso. When setting
the grind size, it should be fi ne but not too
fi ne and powdery.
There are 18 settings on the GRIND SIZE
select dial - The smaller the number, the
fi ner the grind size. The larger the number,
the coarser the grind size. We recommend
you start at the No. 5 setting and adjust as
required.
GRINDING THE COFFEE
• Fill the hopper with fresh coff ee beans.
• Place the portafi lter into the grinding
cradle.
• Insert fi lter basket required into the
porta-fi lter.
Press the FILTER SIZE button to select your
fi lter size (single or double).
AUTOMATIC DOSING
• Push and release the portafi lter to
activate the grinding switch, then allow
the portafi lter to be dosed with fresh
ground coff ee.
• To stop the grinding function during
single or double dose, simply press the
fi lter size button.