Operation Test
– to test for proper installation and function of the speed/ cadence sensor
follow these steps:
1. After programming the computer head unit, start by pushing the
M1/+
button
once
2. Raise the rear wheel, spin, when numbers show up on the top row the speed
sensor is operating normally
3. Turn the crank, when numbers show up in the middle section of the screen the
cadence sensor is operating normally
4. If either the Speed or Cadence measurements fail to operate normally you will
need to re-adjust the magnet position. You will need to adjust the magnet
sensor position to get the magnet within 5mm or less from the sensor pickup
zones.
