10
MOUNTING THE LIGHT UNIT ON A HELMET
(3/3)
6
Extension cable
Ring
Position alignment mark
Plug
Connect the plug so that the directions of the arrow and the
mark match.
To remove the plug, hold the ring, and then pull out the plug.
Knob
Unlock
Lock
Set the knob of the control unit to the “Unlock” position, align
the battery unit with the position alignment mark, and then slide
the battery unit into place.
CAUTION!:
After you connect the battery unit, be sure to
set the knob back to the “Lock” position to
lock the battery unit in place.
To remove the battery unit, set the knob to the “Unlock” posi-
tion, and then pull out the battery unit.
Battery unit
Control unit
7
Slide
