688025-027 G20NE
7
EN
G
LIS
H
CLEANING AND MAINTENANCE:
• Only empty the bain-marie (the water) after it has completely cooled down and has been switched off.
To do this, turn the thermostat/switch to 0.
Step 1: After usage, the device must first be switched OFF, after which you must remove the plug from the
socket. Always do this in the order described to prevent short circuit or other possible dangers.
Step 2: Clean the parts and the device with warm water, a wet cloth and a small amount of cleaning-
detergent and then dry it thoroughly. Do not use benzine, thinner, scouring brush or polishing
powder to clean the device.
•
Pay attention!
Do not rinse the device with water (don’t wash it by using the tap).
This could cause damage to the device and could therefore lead to dangerous situations;
• Never clean the device with a stainless steel brush. This causes scratches and damages to the device;
• Always store the appliance inside and keep it dry;
• Before maintaining the appliance, always make sure you have removed the plug from the socket.
If the appliance does not work or is damaged, check the following:
1. Whether the plug is in the socket;
2. Whether the plug and / or the cord is damaged.
If it is nr. 2 or if another problem occurs, contact your local dealer or authorized service technician.
According to Waste of Electrical and Electronic Equipment (WEEE) directive, WEEE should be
separately collected and treated. If at any time in future you need to dispose of this product
please do NOT dispose of this product with household waste. Please send this product to WEEE
collecting points where available.
688025-027_G20NE.indd 7
688025-027_G20NE.indd 7
29-6-2020 16:15:26
29-6-2020 16:15:26
