Catalyst Machineworks 210-R, Руководство пользователя

Страница: 19 / 31

Steps To Get In The Air (Maiden Flight):
Now that you understand the 210-R it is time to have some fun. It is time to fly! Follow these steps exactly. Remember,
don't get cocky. This is a very fast and powerful machine. Have respect for it, take it slow, and be patient. Your maiden
flight should be line of sight, meaning no FPV goggles. Get use to how the machine will react to your inputs. Take some
time and run through a few lipo packs before attempting FPV flight.
Step 1:
Charge all batteries – Charge all your batteries. This includes your lipo, transmitter, and goggle batteries. See
manufacturer instruction manuals for charging procedures.
Step 2:
Install the lipo - Install exactly as pictured below. You want the wire pigtail pointing toward the front of the
craft. Push the lipo down firmly. Make sure to pass the velcro strap over the lipo balance plug, then loop the strap
through the plastic hoop and pull it tight. Make sure to route the pigtail under the strap. It is very important the lipo is
centered on the fuselage and solidly located. The tips of the props spin very close to the edge of the lipo. During a
crash it is Important the lipo does not move. Do not plug the lipo in yet.