Catalyst Machineworks 210-R, Руководство пользователя

Страница: 18 / 31

11) RC Receiver: This receives signal from the RC Transmitter. The transmitter is commonly referred to as the “TX” and
the receiver the “RX”. The TX and RX must be bound to one another, our RTF kit comes pre-bound.
12) RC Transmitter: This sends signal to the RC receiver. Instructions on how to use your TX are listed in section 2 of this
manual.
13) 5.8 Ghz FPV Goggles: These allow you to experience flying the machine as if you are sitting in the cockpit. To get a
video feed on your goggles you will need to set them to channel 1 band A. If you want to race with others it will be
necessary to make sure each craft is set to a different frequency! See the user manual of your goggles for more
information on how to change goggle FPV receiver frequency and band. Due to the numerous options out there for
goggles we don't include them in your RTF package. We recommend you join the Facebook groups for Catalyst
Machineworks: 'Speed Addicts Owners Group' for more information regarding goggle choice and other feedback
from experienced pilots before making your goggle purchase. Talk to many people before making a decision of which
brand and model is best for you. Make sure to purchase one with a receiver operating at
5.8 Ghz .
14) RC Antenna: These increase the range of your RC transmitter to RC receiver link. There are two antenna which
connect into your receiver, it is important to inspect these antenna after every crash for any damage, if you have any
damage to the antenna itself repair before you fly again!