8
Fill the detergent dispenser with detergent.
The marking indicates the dosing levels , as
illustrated on the right:
The location of main wash cycle detergent,
“MIN”mean s approximately 20g of detergent.
The location of pre-wash cycle detergent,
approximately 5g of detergent
Please observe th e manufacturers dosing and storage
recommendations as stated on the detergent packaging.
Close th e lid and press until it locks in place.
If the dishes are heavily soiled, place an additional detergent dose in the pre-wash detergent
chamber. This detergent will take effect during the pre- wash phase.
You will find information about the amount of detergent for the single programmes on the
last pag e. Please be aware that acco rding to the level of soiling and the specific hardness of
water, differences are possible.
Please observe th e manufacturer's recommen dations on the detergent packaging.
Detergents
There are 3 sorts of deterg ents
1.With phosphate and with chlorine
2.With phosphate and without chlorine
3.Without phosph ate and without chlorine
NOTE:
A
B
Fill in detergent
Normally new pu lverised detergent is without phosphate. Thus the water softener function o f
phosph ate is not given. In this case we recommend to fill salt in the salt container even when
the hardness of water is only 6 °dH. If detergents without phosphate are used in th e case of h ard water
often white spots appear on dishes and glasses. In this case please add more detergent to reach
better results. Detergents without chlorine do only bleach a little. Strong and colou red spots will not
be removed completely. In this case please choose a program with a higher temperature.
Attention
Keep all detergents in a safe place out of children's reach.
Always add the detergent in the dispenser just before starting the dishwasher.
