8
Item
No.
Part
Number
Matl
Description
Qty
1
76801
AL
Crankcase
1
2
8133
Motor, 1/3 HP (AC), Keyed Shaft
1
8135
Motor, 1/2 HP (AC), Keyed Shaft
1
8147
Motor, 3/4 HP (AC), Threaded Shaft
1
8148
Motor, 1.0 HP (AC), Threaded Shaft
1
8136
Motor, 1/3 HP (DC), ODP, 120 VAC, Keyed Shaft
1
8138
Motor, 1/3 HP (DC), ODP, 240 VAC, Keyed Shaft
1
8139
Motor, 1/3 HP (DC), TEFC, 120 VAC, Keyed Shaft
1
3
31527
BB
Plug (1/8"- 27NPT)
1
4
76928
STZP
Screw, Button Head (M6 X 75)
4
5
76346
AL
Cover, Bearing Keyed Shaft
1
76539
AL
Cover, Bearing Threaded Shaft
1
6
31552
FPM
O-ring, Bearing Cover - 70D
1
7*
76701
S
Ring, External Retaining
1
8
76520.050 SFSS
#1 Cam (0.50 gpm, 1750 rpm) Keyed
1
76520.075 SFSS
#2 Cam (0.75 gpm, 1750 rpm) Keyed
1
76520.085 SFSS
#3 Cam (0.85 gpm, 1750 rpm) Keyed
1
75620.100 SFSS
#4 Cam (1.00 gpm, 1750 rpm) Keyed
1
76520.125 SFSS
#5 Cam (1.25 gpm, 1750 rpm) Keyed
1
76520.150 SFSS
#6 Cam (1.50 gpm, 1750 rpm) Keyed
1
76520.200 SFSS
#7 Cam (2.00 gpm, 1750 rpm) Keyed
1
76540.050 SFSS
#1 Cam (0.50 gpm, 1750 rpm) Threaded
1
76540.075 SFSS
#2 Cam (0.75 gpm, 1750 rpm) Threaded
1
76540.085 SFSS
#3 Cam (0.85 gpm, 1750 rpm) Threaded
1
75620.100 SFSS
#4 Cam (1.00 gpm, 1750 rpm) Threaded
1
76540.125 SFSS
#5 Cam (1.25 gpm, 1750 rpm) Threaded
1
76540.150 SFSS
#6 Cam (1.50 gpm, 1750 rpm) Threaded
1
76540.200 SFSS
#7 Cam (2.00 gpm, 1750 rpm) Threaded
1
76540.180 SFSS
#8 Cam (1.80 gpm, 1750 rpm) Threaded
1
9*
76025
SFSS
Key, Woodruff (#405)
1
10
76133
FPM
Seal, Shaft w/SS Flange
1
11
31596
FPM
O-ring, Slinger - 70D
1
12
31552
FPM
O-Ring, Motor Flange
1
13
76909
STZP
Screw, (HSH) (M6 X 30) [01/14]
10
14
76420
AL
Cover, Head
2
15
31592
FPM
O-ring, Head Gasket - 70D
2
16
31577
S
Nut (M6)
2
17
31584
S
Washer, Conical (M6)
2
18
44872
S
Spring
2
19
31595
S
Spacer
2
20
76226
NY
Valve, Inlet
2
21
45429
CC
Plunger (M18 X 16)
2
22
43245
SNG
Seal, High Pressure W/Spring
2
23
35426
FPM
O-ring, Valve Seat - 90D
2
24
76576
D
Seat, Discharge Valve [01/14]
2
25
76206
S
Valve, Discharge
2
26
76865
S
Spring, Valve [06/13]
2
27
76069
PVDF
Retainer, Valve
2
28
76555
AL
Assembly, Plunger/Connecting Rod
(Includes: plunger rod, connecting rod & wrist pin)
2
29
76227
NY
Kit, Inlet Valve
(Includes: items 16, 17, 18, 19, 20)
1
30
76218
FPM
Assembly, Discharge Valve
(Includes: items 23, 24, 25, 26, 27)
1
31
76219
FPM
Kit, Seal and O-ring
(Includes: items 6, 10, 11, 12, 15, 22)
1
32
76127
–
Kit, Brush Replacement (8136 only)
1
*Only use with Keyed Shaft Motors
AL = Aluminum, BB = Brass, CC = Ceramic, D = Acetal, FPM = Fluorocarbon, NY = Nylon,
PVDF = Polyvinylidene Fluoride, S = 304 Stainless Steel, SFSS = 17-4 Stainless Steel,
SNG = Special Blend (Buna), STZP = Steel/Zinc Plated, [xx/xx] = Date of Latest Production Change.
Preliminary Inspection Parts List
Start Up Instructions
After inlet hose, discharge hose and/or accessories have been
installed to ports of pump crankcase follow the preliminary steps as
outlined below prior to startup.
2.1 Ensure all hoses and fittings are tight.
2.2 Ensure water is supplied to the pump before starting.
2.3 Ensure regulating device is set or backed off to the lowest
setting.
2.4 Ensure there is power to the motor.
2.5 Ensure there is water in supply tank of extractor machine.
The 1XP pump requires a gravity fed inlet, and can be used on
pressurized inlets up to 40 psi. Do not starve the pump or run the
pump dry. Note: AMP draw will be elevated during 1st hour of
operation. After 1.0 hour, AMP draw will drop by 10%. Follow the
steps as outlined to ensure properly operation.
3.1 Turn on water supply to the pump.
3.2 Turn on power to pump.
3.3 Open discharge to atmosphere to purge air from system.
3.4 Adjust regulating device to desired pressure.
Shut Down Instructions
To stop the pump in an emergency, turn
off power to pump and relieve all line pressures by triggering gun
handle. Under normal conditions follow the steps as outlined below.
4.1 Turn off power to pump.
4.2 Turn off water supply to pump.
4.3 Squeeze and hold trigger gun to relieve discharge line pressure.
