Caswell CAR-5040 Series, Руководство пользователя

Страница: 114 / 134

CAR-5040 Series User’s Manual
頁 114
addresses DNS server addresses setting. If unchecked, you can specify the address
manually in the following Preferred and Alternate DNS Server fields.
Field Name Description
Preferred DNS
Server
IP address of the preferred DNS server. Use format 0.0.0.0 if entering the
address manually. To change this setting, you must first uncheck the Use DHCP
to obtain DNS Server Addresses option.
Alternate DNS
Server
IP address of the alternate DNS server. Use format 0.0.0.0 if entering the
address manually. To change this setting, you must first uncheck the Use DHCP
to obtain DNS Server Addresses option.
IPv6 Settings (Enter ; to clear IPv6 fields.)
Enabled Enables the availability of the IPv6 protocol when checked, and enables all
other fields in this section except Use DHCP to obtain DNS server addresses.
Auto Configuration When enabled (checked), the IPv6 address for the Appliance management NIC
is obtained from the DHCPv6 server and the IP Address, Prefix Length and IP
Gateway fields are deactivated. Auto Configuration must be checked before
you enable the Use DHCP to obtain DNS server addresses setting. (The default
value is Off.)
IP Address 1 If Auto Configuration is enabled (checked), the IP Address 1 value is
automatically supplied from the DHCPv6 server. If disabled, the IP Address 1
value must be entered manually.
Prefix Length If Auto Configuration is enabled (checked), the Prefix Length is automatically
supplied from the DHCPv6 server. If disabled, the Prefix Length value must be
entered manually (a value from 1 to 128).
Gateway If Auto Configuration is enabled (checked), the Gateway value is automatically
supplied from the DHCPv6 server. If disabled, the Gateway value must be
entered manually.
Link Local Address Specifies the IPv6 address for the Appliance management NIC (read-only).
IP Address 2 Specifies the additional IPv6 address for the Appliance management NIC if one
is available (read-only).
Use DHCP to obtain
DNS server
addresses
If checked, the DNS server address is obtained from the DHCPv6 server. Auto
Configuration must be checked before you enable the Use DHCP to obtain DNS
server addresses setting. If unchecked, you can specify the address manually in
the following Preferred and Alternate DNS Server fields.
Preferred DNS
Server
Displays the IP address of the preferred DNS server. To change this setting, you
must first uncheck the Use DHCP to obtain DNS Server Addresses option.
Alternate DNS
Server
Displays the IP address of the alternate DNS server. To change this setting, you
must first uncheck the Use DHCP to obtain DNS Server Addresses option.
VLAN Settings
Enable VLAN ID If enabled, only matched Virtual LAN (VLAN) ID traffic is accepted.