CASUALPLAY BiCare FIX, Инструкция по эксплуатации, Страница: 21 / 80

21
• When you want to release the Bi Care Fix base from the vehicle seat, press both of the ISOFIX
release buttons, found on the sides of the ISOFIX connectors of the Bi Care Fix base (fig.06).
Adjusting the backrest reclining position
• The Bi Care Fix has 3 reclining positions. For the group 0+, only the reclining position 3 can
be used.
• Pull the handle on the mechanism for changing the reclining position, found on the front part
under the seat (fig.07), and place the seat in the required position by pressing the Bi Care Fix
forwards or backwards. Once it has reached the required position, release the handle of the
reclining mechanism. It will click when correctly fastened into place.
NOTE: Make sure that the seat is locked into one of the three reclining positions, and is not
halfway between two positions.
NOTE: If the Bi Care Fix is installed as group 0+, only the reclining position 3 can be used.
Fitting/removing the seat from the ISOFIX base
• The Bi Care Fix can be installed facing forwards or backwards, depending on the mass group.
o Group 0+ (0-13 kg)/ Group l (9-18 kg). Facing backwards.
o Group l (9-18 kg). Facing forwards.
• Fit the ISOFIX guides on the vehicle seat, if necessary.
• Place the Bi Care Fix base on the vehicle seat.
• Before placing the Bi Care Fix seat in one of the two possible positions, the seat locking
mechanism must be free. To do this, keep the seat locking button (red button) pressed down
while pressing the seat release button (fig.08).
• Place the Bi Care Fix in one of the two possible positions, fitting the rods on the bottom of the
seat into the anchor points on the base (fig.09).
• To lock the seat to the base, press the seat locking button (red button). The fastener indicator
of the Bi Care Fix will turn green (fig.10).
WARNING: Make sure that the seat is correctly fastened to the base. To do this, check that the
two rods, found under the seat, have been correctly fastened to the locking system.
• If you want to separate the Bi Care Fix seat from its base, you need to release the locking
system. Keep the seat locking button (red button) pressed down while pressing the seat
release button (fig.08). Pull the Bi Care Fix seat upwards.
Adjusting the harness
• To adjust the harness the first step is to check that the harness is at the correct height at the
child’s shoulders (fig. 02). To reach the correct height, adjust the Bi Care Fix headrest..
• Loosen the harness pressing the harness adjustment button and pulling the chest part of the
harness (fig.11).
• To open the safety harness buckle, press the red button found in the middle of the buckle.
Next, separate the two metal parts that were fastened to the buckle.
• Once the harness is placed on the child, bring the two metal parts together and insert them into
the buckle. It will click when correctly fastened (fig.12).
• Adjust the harness to fit the child’s body by pulling the harness adjustment strap (fig.13). The