20
Instructions for use
Adjusting the headrest
• The headrest has 8 positions, to suit the child’s height.
• Lift the upholstery (fig.01), pull the red handle while adjusting the height of the headrest. The
height of the harness will also change along with the headrest.
WARNING: The height of the harness will also change along with the headrest.
Adjusting the length of the support bar
• Press the support bar adjustment button, and adjust the length until it touches the floor of the
vehicle (fig.03).
• A green indicator will appear on the support bar when it is fitted correctly.
• Check that the support bar is locked into place and that it does not move upwards or
downwards.
NOTE: Check that the length of the support bar is not halfway between two positions, and that
it touches the floor.
Adjusting the ISOFIX connectors
• Gently pull the ISOFIX connector adjuster, found on the front of the Bi Care Fix base, this will
pull the connectors out of the base (fig.04).
• With the ISOFIX connectors pulled out as far as they will go, fasten the base to the ISOFIX
anchors on the vehicle seat (as a general rule they are situated between the backrest and seat
of the vehicle). They will click when fastened, and a green indicator will appear on each of the
ISOFIX connectors of the base (fig.05).
• To finish fitting the Bi Care Fix base to the vehicle seat, gently pull the ISOFIX connector
adjuster again, while pressing the Bi Care Fix base against the seat.
• When you want to release the Bi Care Fix base from the vehicle seat, press both of the ISOFIX
release buttons, found on the sides of the ISOFIX connectors of the Bi Care Fix base (fig.06).
Adjusting the backrest reclining position
• The Bi Care Fix has 3 reclining positions. For the group 0+, only the reclining position 3 can
be used.
• Pull the handle on the mechanism for changing the reclining position, found on the front part
under the seat (fig.07), and place the seat in the required position by pressing the Bi Care Fix
forwards or backwards. Once it has reached the required position, release the handle of the
reclining mechanism. It will click when correctly fastened into place.
Adjusting the ISOFIX connectors
• Gently pull the ISOFIX connector adjuster, found on the front of the Bi Care Fix base, this will
pull the connectors out of the base (fig.04).
• With the ISOFIX connectors pulled out as far as they will go, fasten the base to the ISOFIX
anchors on the vehicle seat (as a general rule they are situated between the backrest and seat
of the vehicle). They will click when fastened, and a green indicator will appear on each of the
ISOFIX connectors of the base (fig.05).
• To finish fitting the Bi Care Fix base to the vehicle seat, gently pull the ISOFIX connector
adjuster again, while pressing the Bi Care Fix base against the seat.
Содержание BiCare FIX
