castorama CVE0610F, Инструкция по эксплуатации

Страница: 24 / 68

GB
18
4.2.2 COMFORT
The “Comfort“ temperature set point is the temperature
desired by the user.
Press the “Mode“ selection key until the icon
appears on the LCD.
The icon of the ASC function (see Ch. 4.3.1)
VWDUWV©¾DVKLQJ©3UHVV©WKH©©©©©©©NH\©WR©DFWLYDWH©WKH©
function or the “-” key to de-activate it.
Select the desired temperature set point by
using the “+“ and “-“ keys.
The temperature can be choosen in the inter-
val between 7 °C and 32 °C.
4.2.3 NIGHT/ECO
In “Night/Eco“ mode the temperature set point must
not be higher than “Comfort“ temperature set point. If
the “Comfort” temperature is set below the “Night/Eco”
temperature, the latter will be automatically adjusted
accordingly.
4.2.4 ANTI-FREEZE
,Q©±$QWLõ)UHH]H±©PRGH©WKH©WHPSHUDWXUH©VHW©SRLQW©LV©½[HG©DW©
7 °C. The appliance starts heating when room temperature
goes under 7 °C and with low energy consumption it pre-
vents the room temperature to reach the freezing point.
Press the “Mode“ selection key until the icon
appears on the LCD.
This operating mode is recommended when no people is in
the room for more than 1 day.
Press the “Mode“ selection key until the icon
appears on the LCD.
Select the desired temperature set point by
using the “+“ and “-“ keys.
The use of this operating mode is recommended in night-
time hours and in case no people is in the room for more
than 2 hours.
CHOICE OF PROGRAM
Press the ”Mode” key until the icon is dis-
played. Then press the ”Mode” and ”-” keys to-
gether and hold them both down for at least 3
seconds.
7KH© SURJUDP© FRGH© 3© 3© 3© DQG© 3© ¾DVKHV©
Press the “+” and “-” keys to set the program.
3UHVV©WKH©±0RGH²©NH\©WR©FRQ½UP
PROGRAM P1 HOURS MODE
FROM MONDAY TO FRIDAY
0 - 6 Night/Eco
6 - 9 Comfort
9 - 16 Night/Eco
16 - 23 Comfort
23 - 0 Night/Eco
SATURDAY AND SUNDAY
0 - 7 Night/Eco
7 - 23 Comfort
23 - 0 Night/Eco
PROGRAM P2
HOURS MODE
FROM MONDAY TO SUNDAY
0 - 7 Night/Eco
7 - 23 Comfort
23 - 0 Night/Eco
PROGRAM P3 HOURS MODE
FROM MONDAY TO FRIDAY
0 - 6 Night/Eco
6 - 9 Comfort
9 - 13 Night/Eco
13 - 23 Comfort
23 - 0 Night/Eco
SATURDAY AND SUNDAY
0 - 7 Night/Eco
7 - 23 Comfort
23 - 0 Night/Eco
With the “P4” program, you can set different temperatures
(”Comfort” and ”Night/Eco”) over a 24 hour period for each
day of the week.
PROGRAM P4 - CUSTOM
4.2.5 CHRONO
In “Chrono” mode, you can select one of the three preset
chrono-thermostat programs or the custom program. The
latter lets you set various temperatures (”Comfort” and
”Night/Eco”) over a 24 hour period for each day of the week.
SETTING THE CURRENT DAY AND TIME
Before going on with the P4 custom program setup, check
that the hour and day of the week have been correctly set up.