CASTLE TSM-35, Руководство по диагностике

Страница: 2 / 22

TSM-35 Screw Pocket Machine Troubleshooting
• Check the transformer ( E35713 )
o
*** CAUTION:
ONLY A QUALIFIED ELECTRICIAN SHOULD PERFORM THE
FOLLOWING STEPS.
POWER MUST BE SUPPLIED TO THE MACHINE TO CHECK THE
TRANSFORMER. THIS PRODUCES A SHOCKING HAZZARD. DO NOT TOUCH THE CONTROL
BOX COMPONENTS WITH ANYTHING OTHER THAN ELECTIRCAL TESTING PROBES. ***
o
There should be 230V 3ph or 480V 3ph going into the transformer (Check H1 (480V) or H2
(230V) AND H4 at top of transformer)

If no power into the transformer, check main power to the machine.
o
There should be 24V AC coming out of the transformer and entering the board at terminals
1 and 2
o
Check to make sure the fuse is intact ( E16224 )
• If all switches and transformer check out OK, then problem is with the contactor and/or overload.
( E91024 Contactor / E91827 480V Overload / E94060 230V Overload / E94061 Single phase
overload)
o
Check for loose wires on Contactor and Overload
o
It is recommended to change both components. Currently the Sprecher & Schuh (S & S)
brand we use will need both pieces to be changed, regardless if there is an old S & S in the
machine. The new revision will not work with the old.
o
**** Components from different manufacturers cannot be combined. ****