Operator’s Manual
Serenity Pellet Stove
Check for parts online at
www.castlestoves.com
or call 800-345-6007 M-F 8-5 CST
9
SPECIFICATIONS
Model Number
Serenity
BTU/hour input (1)
4.0 lbs/hr
Heating Capacity (2)
1,500 sq. ft.
Electrical Rating (3)
115 Volts, 60 Hz
Power Consumption
520 Watts ignition
150 Watts operating
Fuel Storage Capacity
40 lb
Flue Size (4)
3 in.
Width
18.25 in.
Height
34 in.
Depth
23.75 in.
Weight
186 lb
(1) Heat output will vary, depending on the brand, type and
quality of fuel and the moisture content. Consult your dealer
for best results.
(2) Based on post 1982 home construction, requiring 35 BTU/
Hr. per Sq. Ft.
(3) Install per NFPA 70 and follow all state and local codes,
contact licensed electrical contractor for assistance.
(4) Install per NFPA 211 and follow all state and local codes,
contact licensed installers for assistance.
Listing label:
Tested to the following standards: UL1482, ASTM E1509, ULC/
ORD-C1482-M1990, UCL S627-2000, and E2779
GLASS SPECIFICATIONS
This stove is equipped with 5 mm ceramic glass. Replace glass
only with Castle Pellet Stoves ceramic glass. Call your servicing
dealer or Castle at 1-800-345-6007 for replacement parts.
UNPACKING
Your Castle Serenity will come fully assembled. Remove all
packing material and tape from the inside of the firebox.
Remove any tape on the outside of the glass. Open the
hopper, remove all packing material and power cord.
NOTE: MAKE SURE THE HOPPER IS FREE OF ALL FOREIGN
MATTER BEFORE FILLING WITH FUEL. FOREIGN
MATERIAL WILL CAUSE AUGER JAMS AND WILL VOID
STOVE WARRANTY.
CAUTION
THIS INSTALLATION MUST CONFORM WITH LOCAL
CODES. IN THE ABSENCE OF LOCAL CODES YOU
MUST COMPLY WITH ASTM E1509, (UM) 84-HUD, ULC/
ORD-C-1482 AND and UCL S627-2000.
CASTLE PELLET STOVES, MANUFACTURER OF
THIS APPLIANCE, RESERVES THE RIGHT TO ALTER
ITS PRODUCTS AND/OR THEIR SPECIFICATIONS
WITHOUT NOTICE.
Содержание Serenity Pellet Stove
Страница 44: ......