Remote Control:
CLEANING
The heater requires regular cleaning to ensure trouble free operation:
•
Unplug the heater from the mains supply before cleaning.
•
Ensure that the heater has been allowed to cool before cleaning.
•
Use a damp cloth (not wet) to wipe the exterior of the heater to remove dust and dirt.
•
Do not allow any water or other liquid to enter the housing or control panel.
•
Ensure the heater is dry before plugging back into the mains supply.
CAUTION:
Do not use harsh detergents, chemical cleaners or solvents as they may damage the
surface finish of the heater.
WARNING:
In order to avoid overheating, do not cover the heater. Fabric, clothing or other flammable
materials may ignite if placed against or in close proximity to the heater. No flammable materials should
be placed near the heater. This appliance is for indoor use only. Do not use outdoors.
STORING THE HEATER
When the heater is not used for long periods of time, it should be protected from dust and stored in a
clean dry place. Ensure the appliance and all parts are thoroughly cleaned and dried before storage. We
recommend storing the appliance in its original box or in a clean, dry place.
SPECIFICATIONS
Model
Voltage
Frequency
Wattage
NR10
220-240V~
50/60Hz
1000W
NR15
220-240V~
50/60Hz
1500W
NR20
220-240V~
50/60Hz
2000W
Standby on/off
Heating mode
Temperature control
Timer control
Increase setting
Decrease setting
