Underground Scissor Lift QJY3.2-1
10
Observe the rated load capacity and load distribution.
Do not allow anyone to climb on lift or stay inside vehicle.
After raising the vehicle briefly, stop and check adapters for secure contact.
Once contact the lift points, check safety engagement. Make sure the vehicle doors are
closed during raising and lowering cycles.
Remove obstacle around before working.
Weight of lifted car should not be over the lifting capability.
Before lifting, please set well the car
’s manual handle; underlay the slip protective plastic
board.
Be attentive while ascending or descending. Stop the machine if any abnormity, check and
exclude failure.
When equipment is not under work or at night, descent it to the lowest position, and drive
the car away, then turn off power supply.
8.1 Defects / Malfunctions
In case of defects or malfunctions such as jerky lift movement or deformation of the
superstructure, support or lower the lift immediately.
Turn off and padlock the main switch. Contact qualified service personnel.
8.2 Controls
8.2.1 Control unit
