3
Warning
This manual is necessary for proper operation and maintenance of the device. Before starting
work, it is imperative that you read this user manual. Please keep this manual carefully so that you can
use it at any time if necessary.
1. Introduction
The mounting machine is designed for removing and putting on tires.
Note: Use only as intended. The manufacturer shall not be liable for damages resulting from the misuse
of the device as specified in this manual.
2. General safety rules
The device may only be operated by a person with relevant experience who is authorised to use it. The
manufacturer shall not be liable for damages resulting from changes in the device that have not been
agreed with him. Such equipment is no longer covered by the warranty. If one of the components of
the device is damaged, replace it according to the spare parts list. (Note: The warranty is valid for 12
months from the date of purchase of the product.) The manufacturer is not responsible for interference
with the device that has not been agreed with him in advance, especially in the event of interference
with electrical installations.
All work carried out on the electrical installation may be outsourced only to qualified personnel!
3. Technical data
Rim size (outer mounting) 10"-21" (outside)
Rim size (internal mount)12"-24" (internal) (operating pressure 8-10 bar)
Max wheel diameter 1040 mm (41')
Max tyre width 355mm (14')
Max cut-off pressure
(at 1 Mpa air pressure) 2500Kg
Operating pressure 8-10 bar
Power 110V (1ph)/ 220V (1ph) / 380V (3ph)
Engine power 1.1KW (1.5Hp)/ 0.75KW (1Hp)
Maximum torque (table)1078Nm (110Kg.m)
Total size 96X76X103cm
Noise level <75db
4. Transport
Transport only with a forklift. According to Figure 1
Fig. 1
