background image

Vehicle-Mounted TPM700 Technical Manual

TMO - PS11061AENAA01

Page

 

Maintenance

14/10/08

4-47

T

his document is the pro

perty of EADS Secure Ne

tworks 

and should

 not be copied or circ

ulated

 with

out permission

Ce document est la prop

rié

té de EADS Secure Net

w

orks et 

ne doit pas être r

eprod

uit ou 

communiqué sans autor

isation

7

1

2

3

4

5

REPLACING THE SPEAKER MICROPHONE

OPERATOR(S)

• 1 operator

TIME REQUIRED

• 20 minutes

TOOL(S)

• Standard tool box

• 1 set of insulated screwdrivers for slot-head screws (2.5 mm, 3.5 mm, 4 mm).

PRELIMINARY OPERATION(S)

• If necessary, switch off the CH by pressing and holding down the 

 key (Figure 2.3, 

item 2) on the CH.

REMOVAL

• Remove the two screws (Figure 4.5, item 16) securing the CH (item 2) to the bracket 

(item 3).

• Remove the CH (item  2) from the bracket (item 3) and put it to one side.

• Unplug the speaker microphone cable from its connector (item 9).

INSTALLATION

• Check that the technical status of the new speaker microphone is compatible with the 

old one (see section 1.3, Document  [4]).

• Plug the speaker microphone cable into its connector (Figure 4.5, item 9).

• Place the CH (item  2) on the bracket (item  3).

• Secure the assembly to the CH (item 3) with two fixing screws (item 16).

COMPLEMENTARY OPERATION(S)

• Power up the CH with a short press of the 

 key (Figure 2.3, item 2) on the CH

• Carry out a correct operation test by making a call (see section 1.3, Document [1]).

SHEET

E-6

Содержание TPM700

























































































Отзывы: