
M e n u f u n c t i o n s
Write text messages
1. Select
.
2. Write the message. For details, see Write text on page 67. You can also
insert a template into the message; select
, and select the desired template.
The number of characters left for the message and the number of
characters in the current message are shown at the top right corner of the
display.
3. When you finish writing the message, press
.
Note that if the receiving radio does not support text message
concatenation, the maximum length of the text message is 140 characters
to private numbers and 160 characters to phone and office extension
numbers.
To send the message as a flash message (network service), select
. The receiving terminal must
support the reception of flash messages. When you receive a flash
message, the beginning of the message appears on the display.
Your organisation can define if the flash messages are deleted after you
have read or saved them in the
Inbox
folder.
folder. It is possible to configure the radio
folder is full, the oldest read message is
automatically deleted when a new message is received.
4. Select the recipient of the message in one of the following ways:
•
If a default recipient number is displayed, press
to send the
message to the default recipient. See Message settings on page 83.
•
Search for an individual recipient from Contacts. Select
, and select the desired name and number. To send
when the number is displayed.
•
Search for a talk group in the selected folder. Select
, and select the desired group to send the message.
Polaris_en_print.book Page 80 Tuesday, October 23, 2012 12:30 PM