Non contractual document - Cassese France
®
- Document non contractuel
- 18 -
5.D. FILE MANAGEMENT OF STORED POSITIONS FROM F1 TO F9
5.E. DESCRIPTION OF THE STAPLING CYCLE
Save & Delete :
-A long press (> 1 second) on the button Favorites Save
29
saves the present program in EEProm
memory. The program is saved at the switch off.
-If you modify a program without save it, the modifications will be lost at the switch off.
-A press on the button Clear
26
deletes the present position.
-A long press (2 seconds) on the button Clear
26
deletes all the positions, but the crossbar doesn’t
initialize. When the pre-clamp button
14
is ON, a press on the button Clear
26
deletes all the
positions and the crossbar comes back to default.
Remember of saved values :
-A press on the button Favorites Recall
28
increments the stapling program from
F1
to
F9
then
comes back to
F1
(a stapling program is composed by 5 stapling positions and their 5 corresponding
quantities of wedges, 5 wedges maximum).
Rules of the stapling cycle :
-The stapling cycle always begins with the stapling position 1 and always finishes at the stapling
position 5.
-The stapling positions are not necessarily in an ascending or descending order and can be
positionned wherever.
-If there is only 1 stapling position, there is not a sequence of initialization at the end of cycle.
-If more than one position have been executed, the crossbar initializes itself and take up first
position again.
Screen displays :
-If a position is empty (deleted or nonexistent, the quantity indicates “ - “), it will not be executed
during the stapling cycle and the next stapling position will be done.
-During the stapling cycle, the number of the present stapling position displays in reverse video.
-At the beginning of the stapling cycle, the screen displays at the second line to the right “MOD(x)”
which means how the stapling cycle will be executed (from 0 to 3, MOD(x) = MOD(1) for example,
see
5.I. Parameters
page 21). Then the screen displays “EXE” to indicate that the stapling cycle
is running.
-At the end of the stapling cycle, the screen displays at the second line to the right “END” to
indicate that the stapling cycle is finished, then the machine waits the loosening of the pedal and
the stapling button
15
(in manual mode) to reinitialize.
Содержание MACH 1 UNI
