CAMcourse
Page 7
Alterations / Errors Reserved 16/Wo/266D
Cassens & Plath GmbH, Am Lunedeich 131, D-27572 Bremerhaven, Germany, tel +49(0)471 483 999 0, fax +49(0)471 483 999 10
www.cassens-plath.de
,
6. Installation of Camera:
Longitudinal Compass Mounting:
First install overhead compass (refer to
manual of overhead compass).
Then install monitor unit (ref. para. 8) and
make connections between junction box 1
and junction box 2 (ref. para. 5).
Switch on unit. The picture of camera
should be seen on monitor. Camera is
already pre-adjusted by manufacturer.
Mirror of camera plate is faced ahead.
Now position the camera so that the picture
of card and lubberline is displayed in centre
of monitor. Mark the four mounting holes
of camera plate, and fix camera plate.
Junction box 1 and junction box 2 can be
fixed with adhesive tape applied on the back
of boxes.
If necessary adjust camera (ref. para. 7).
Ahead
