20
ADVICE !
Before the first use it’s recommended to clean thoroughly your appliance in order
to eliminate all the residue of grease or other products.
-
Before using your appliance clean it and all the accessories with water and
washing up then dry them
-
Place it on a flat, stable, heat-resistant work surface
-
Before the first use fill the boiler with water to “MAX” level, boil, discard the
water, and then rinse thoroughly.
-
Pour cold water (proper to consume) in the tank respecting the level marks
(between the maximum and the minimal level).
-
Place and close the lid (by turning clockwise to lock into place).
-
Press ON/OFF switch on ON position. Then the heating indicator lights up.
-
Dial the thermostat button on the desired temperature. This temperature must
be adapted to the kind of drinks prepared with the hot water.
-
When the heating indicator lights off and the Temperature control indicator
turn to green it means good temperature has been reached. It will stay at the
good temperature.
-
You just have to poor hot water in a cup or other container by pulling the tap
and keeping it in the position till the cup or jar is full. To stop let the tap going
back in its initial position automatically.
-
Regularly check the level of liquid in the tank.
-
After using put the power switch on the off position, unplug your appliance
and let the removing liquid go away over a container (using the tap)
WARNING !
Hot surface!
The water tank gets very hot when in use or just after use!
Never open the cover while the appliance is in function: hot steam can cause injuries.
Do not touch hot surfaces of the appliance, touch only the handle and the
switches.
NOTE !
There will be some water left in the bottom of the urn. Check that both the urn and
the remaining water have cooled to a safe handling temperature. Carefully lift the
urn and pour out the remaining water.
6. Maintenance and cleaning
6.1 Safety instructions
Always unplug the appliance for maintenance and cleaning