Caso AirVital Pro 5410, Оригинальное руководство по эксплуатации

Страница: 35 / 116

caso AirVital Pro 35
11.4 Unpacking
Remove the device out of the carton, remove the packaging material,
shovel and measuring container.
11.5 Disposal of the packaging
The packaging protects the device against damages during transit. The
packaging materials are selected in accordance with environmentally
compatible and recycling-related points of view and can therefore be
recycled.
Returning the packaging back to the material loop saves raw materials
and reduces the quantities of accumulated waste. Take any packaging
materials that are no longer required to “Green Dot” recycling collection
points for disposal.
Please note
► If possible, keep the original packaging for the device for the duration of
the guarantee period of the device, in order that the device can be re-
packaged properly in the event of a guarantee claim.
11.6 Electrical connection
In order to ensure the safe and trouble-free operation of the device, the
following instructions must be observed for the electrical connection:
•
Before connecting the device, compare the connection data (voltage
and frequency) on the rating plate with those of your electrical network.
This data must agree in order that no damages occur in the device
If in doubt, ask your qualified electrician.
•
The electrical outlet must be protected by a 16A safety cut-out switch.
•
The connection between the device and the electrical network may
employ a 3 meter long (max.) extension cable with a cross-section of
1.5 mm². The use of multiple plugs or gangs is prohibited because of
the danger of fire that is involved with this.
•
Make sure that the power cable is undamaged and has not been
installed under the ice maker or over hot or sharp surfaces.
•
The electrical safety of the device is only guaranteed if the device is
connected to a properly installed protective conductor system.
Operations using an electrical outlet without a protective conductor are
prohibited. If in doubt, have the house installation checked over by a
qualified electrician.
The manufacturer cannot be made responsible for damages that are
caused by a missing or damaged protective conductor.